Conductive Fabric

X00797 260T Heavy-Duty Plain Weave Conductive EMF Shielding Fabric

Name: 260T Heavy-Duty Plain Weave Conductive EMF Shielding Fabric
Brand: OneThinktec
SKU: X00797

X00797 is a 260T heavy-duty plain-weave copper-nickel polyester conductive fabric for EMI/RFI shielding material evaluation. Review its 0.12 mm thickness, 1.1 m width and catalog specifications before selection.

X00797 260T Heavy-Duty Plain Weave Conductive EMF Shielding Fabric

KEY DATA

MaterialCopper + Nickel + Polyester

Width1.1m

Thickness0.12mm

Surface Resistance< 0.05 Ω

Shielding Effectiveness70-90 dB

PatternPlain

Request Sample / Quote

ENGINEERING VIEW

Where This Fabric Fits

Consider this heavier 260T plain-weave construction where handling robustness and a flexible conductive textile are important. Confirm installation geometry, repeated bending demands and shielding performance in the finished assembly.

Typical applications to evaluate

EMI/RFI shielding liners for industrial equipment
Conductive textile panels and covers
Electronic enclosure fabric conversion
Applications requiring a heavier plain-weave fabric

Important: Application examples are selection guidance, not a guarantee of finished-system performance. Validate the complete construction at the relevant frequencies.

Complete Specifications

Pattern	Plain
Color	Grey
Width	1.1m
Thickness	0.12mm
Surface Resistance	< 0.05 Ω
Material	Copper + Nickel + Polyester
Shielding Effectiveness	70-90 dB
Salt Spray Test	Grade A-10 (5% NaCl, 48hrs)
Density	260T
Weight	120 ± 5 g/m²
Roll Specs	1.1 × 100 m
Packing	2 rolls/carton,120x23x23 cm
G.W. / N.W.	26/24kg

HOW TO READ THE DATA

Design Notes

Shielding effectiveness values are material-level specifications unless a specific test method and sample construction are stated. Finished-product performance can be lower because of seams, openings, penetrations and bonding.
For regulated or compliance-critical projects, confirm the exact material lot, test method and finished-assembly requirement before approval.

For a practical explanation of dB values, frequency dependence, seams and grounding/contact design, see the OneThinktec Shielding Knowledge Center.

SELECTION FIT

When to Evaluate X00797

Good starting point when

Projects comparing 0.12 mm heavy-duty conductive fabric against thinner textile alternatives for shielding panels, lining or covers.

Compare another construction when

A thinner, lighter or adhesive-backed material may better suit tight folds, complex surfaces or bonded installation.

Selection rule: Confirm the exact frequency target, installation method, width, finish and environmental requirement before final approval. Catalog material data does not replace finished-assembly validation.

Related materials to compare

Open the conductive fabric comparison & selection guide →

BUYER FAQ

Questions Engineers Commonly Ask

What is this material best used for?

Shielding liners, conductive textile panels and covers where a heavier plain-weave construction is under evaluation.

Does the fabric alone determine finished shielding performance?

No. Seams, openings, closures, bonding, grounding/contact design, penetrations and the complete enclosure construction can materially affect the final result.

What information should I provide for material selection?

Share the target frequency band, shielding requirement, required width, installation or conversion method, environmental conditions, quantity and any adhesive or surface-finish requirement.

Can I request samples or custom conversion?

Yes. OneThinktec supports sample evaluation and can discuss width, finish, adhesive backing and conversion requirements based on the project.