Self-Adhesive Fabric

X00795 Self-Adhesive Single-Side Black EMI Shielding Fabric Plain Weave

Name: Self-Adhesive Single-Side Black EMI Shielding Fabric Plain Weave
Brand: OneThinktec
SKU: X00795
Availability: InStock

X00795 combines conductive shielding fabric with an adhesive backing and release liner for faster positioning and lamination. It is intended for projects where a flexible shielding layer must be applied to a substrate without a separate adhesive process.

X00795 Self-Adhesive Single-Side Black EMI Shielding Fabric Plain Weave

KEY DATA

MaterialCopper + Nickel + Polyester + Conductive Adhesive + Release Paper

Width1.06 m

Fabric Thickness0.08±0.01 mm

Surface Resistance< 0.04 Ω

Shielding Effectiveness80-60 dB

Frequency Range10 MHz-38 GHz

Request Sample / Quote

ENGINEERING VIEW

Where This Fabric Fits

Choose self-adhesive fabric when installation speed and positioning are important. Confirm substrate compatibility, bond durability and the required electrical continuity through seams, overlaps and ground/contact points.

Typical applications to evaluate

Electronic enclosure lining
Panel and cabinet shielding
Cable and harness wrapping
Custom die-cut or laminated shielding parts

Important: Application examples are selection guidance, not a guarantee of finished-system performance. Validate the complete construction at the relevant frequencies.

Complete Specifications

Pattern	Plain
Width	1.06 m
Fabric Thickness	0.08±0.01 mm
Glue Paper Thickness	0.03±0.005 mm
Surface Resistance	< 0.04 Ω
Material	Copper + Nickel + Polyester + Conductive Adhesive + Release Paper
Frequency Range	10 MHz-38 GHz
Shielding Effectiveness	80-60 dB
Salt Spray Test	Grade A-10 (5% NaCl, 48hrs)
Temp. Range (Short)	-40°C~180°C
Temp. Range (Long)	-10°C~80°C
Roll Specs	1060 × 50 m
Packing	2 rolls/carton,120x23x23 cm
G.W. / N.W.	27.5/24 kg

HOW TO READ THE DATA

Design Notes

Shielding effectiveness values are material-level specifications unless a specific test method and sample construction are stated. Finished-product performance can be lower because of seams, openings, penetrations and bonding.
A listed frequency range should not be interpreted as identical attenuation at every frequency. Request frequency-by-frequency data when a project has a critical band.
For regulated or compliance-critical projects, confirm the exact material lot, test method and finished-assembly requirement before approval.

For a practical explanation of dB values, frequency dependence, seams and grounding/contact design, see the OneThinktec Shielding Knowledge Center.

BUYER FAQ

Questions Engineers Commonly Ask

What is this material best used for?

Electronic enclosure lining, panel and cabinet shielding, and related shielding assemblies where a flexible conductive textile is appropriate.

Does the fabric alone determine finished shielding performance?

No. Seams, openings, closures, bonding, grounding/contact design, penetrations and the complete enclosure construction can materially affect the final result.

What information should I provide for material selection?

Share the target frequency band, shielding requirement, required width, installation or conversion method, environmental conditions, quantity and any adhesive or surface-finish requirement.

Can I request samples or custom conversion?

Yes. OneThinktec supports sample evaluation and can discuss width, finish, adhesive backing and conversion requirements based on the project.