Conductive Fabric

X00606 230T Plain Weave Conductive EMI/RFI Shielding Fabric 1.1m Width

Name: 230T Plain Weave Conductive EMI/RFI Shielding Fabric 1.1m Width
Brand: OneThinktec
SKU: X00606

X00606 is a plain copper-nickel plated polyester conductive fabric for flexible EMI/RFI shielding and conductive textile assemblies. It can be evaluated for enclosure lining, cable wrapping, grounding/contact layers and converted shielding parts according to the project construction.

X00606 230T Plain Weave Conductive EMI/RFI Shielding Fabric 1.1m Width

KEY DATA

MaterialCopper + Nickel + Polyester

Width1.1m

Thickness0.08 mm

Surface Resistance< 0.04 Ω

Shielding Effectiveness80-60 dB

Frequency Range10 MHz - 38 GHz

Request Sample / Quote

ENGINEERING VIEW

Where This Fabric Fits

Choose the construction by balancing shielding requirement, surface resistance, width, thickness, flexibility, finish, environmental exposure and conversion method. The material datasheet is a starting point; validate the finished assembly for critical designs.

Typical applications to evaluate

Electronic enclosure liners
Cable and harness wrapping
Grounding/contact layers
Converted shielding parts and laminates

Important: Application examples are selection guidance, not a guarantee of finished-system performance. Validate the complete construction at the relevant frequencies.

Complete Specifications

Pattern	Plain
Color	Grey
Width	1.1m
Thickness	0.08 mm
Surface Resistance	< 0.04 Ω
Material	Copper + Nickel + Polyester
Frequency Range	10 MHz - 38 GHz
Shielding Effectiveness	80-60 dB
Salt Spray Test	Grade A-10 (5% NaCl, 48hrs)
Temp. Range (Short)	-40°C~180°C
Temp. Range (Long)	-10°C~80°C
Density	230T
Roll Specs	1.1 × 100 m
Packing	2 rolls/carton,120x23x23 cm
G.W. / N.W.	20/18 kg

HOW TO READ THE DATA

Design Notes

Shielding effectiveness values are material-level specifications unless a specific test method and sample construction are stated. Finished-product performance can be lower because of seams, openings, penetrations and bonding.
A listed frequency range should not be interpreted as identical attenuation at every frequency. Request frequency-by-frequency data when a project has a critical band.
For regulated or compliance-critical projects, confirm the exact material lot, test method and finished-assembly requirement before approval.

For a practical explanation of dB values, frequency dependence, seams and grounding/contact design, see the OneThinktec Shielding Knowledge Center.

SELECTION FIT

When to Evaluate X00606

Good starting point when

General flexible EMI/RFI shielding, lining, wrapping and converted conductive textile parts where a plain construction is suitable.

Compare another construction when

Compare a wide-width, self-adhesive, black-finish, ripstop or heavier grade when those mechanical or installation requirements drive the project.

Selection rule: Confirm the exact frequency target, installation method, width, finish and environmental requirement before final approval. Catalog material data does not replace finished-assembly validation.

Related materials to compare

Open the conductive fabric comparison & selection guide →

BUYER FAQ

Questions Engineers Commonly Ask

What is this material best used for?

Electronic enclosure liners, cable and harness wrapping, and related shielding assemblies where a flexible conductive textile is appropriate.

Does the fabric alone determine finished shielding performance?

No. Seams, openings, closures, bonding, grounding/contact design, penetrations and the complete enclosure construction can materially affect the final result.

What information should I provide for material selection?

Share the target frequency band, shielding requirement, required width, installation or conversion method, environmental conditions, quantity and any adhesive or surface-finish requirement.

Can I request samples or custom conversion?

Yes. OneThinktec supports sample evaluation and can discuss width, finish, adhesive backing and conversion requirements based on the project.